Calibrating Your Spreader. Divide 100 by the square foot the bag of fertilizer covers 2. Multiply the weight of the bag by this number 3. The answer is the amount of fertilizer needed to cover 100 sq. Place this amount in the spreader 5. Mark off a 10 ft. Apply using the suggested setting. Spreader Not Listed - Setting Tip: Set spreader at 1/4 to 1/3 of the dial as a starting point. This is just a guide always calibrate spreader per the manufactures recommendation. Do not over apply fertilizer. Application rate for the Menards Premium fertilizer is 3.4Lbs per 1,000 sq ft. Always calibrate spreader. Improper spreader settings may result in uneven fertilization, turf injury, inadequate pest control, and a waste of time and money. When using a LESCO product, find the designated setting listed on the bag and then cross reference that number to your particular spreader type using the charts below. Ez Drop Spreader Setting Guide - drjhonda.com. What is the conversion between republic ez is the conversion between Republic EZ spreader settings and lbs the EZ Drop Spreader by or Cargo EZ Hitch is an Easy Hitch trailer hitch guide PDF 2008 Jetta Gli Service Manual.pdf Republic ez broadcast spreader settings documents u002702 product label guide 28-51 by bland2312 I have a Republic EZ drop. Generic Settings If you can't find setting information for your model, calibrate the model by measuring fertilizer to cover 100 square feet according to package directions. Set the spreader on low.
Republic Ez Spreader Parts
Application Tips for Fertilizing a Lawn:
Ez Republic Broadcast Spreader Settings
Republic Ez Spreader Parts
Application Tips for Fertilizing a Lawn:
Ez Republic Broadcast Spreader Settings
Republic Ez Spreader
- Always use a lawn spreader. NEVER spread product by hand!
- Mow your lawn before fertilizing.
- Close the spreader hopper before adding product.
- Fill the hopper on a drive or walkway to avoid over application, particularly important for herbicides and synthetic fertilizers which can burn your lawn.
- Sweep up any product that falls on hard surfaces to avoid it washing into waterways.
- If you accidentally dump Milorganite on your lawn, gather what you can then use a stiff broom is spread what remains.
- Walk at a steady pace. You're an important part of the distribution rate equation. The slower you walk the more product will be distributed, and less is distributed when you walk faster. That's one of the reasons application rates can vary.
- Drop spreaders: overlap wheel marks to ensure even coverage and avoid unfertilized stripes.
- First, apply a header strip—two overlapping passes—of fertilizer around the perimeter of your lawn for easier turns.
- Start along the longest edge of your lawn.
- Close the spreader off when making turns to avoid uneven application.
- After a turn, start walking before opening the spreader.
- Apply 50% of product in one direction and the other 50% in the opposite direction (north to south and east to west) to help ensure even coverage. Do this by reducing your spreader setting by half.
- Avoid spreading product on windy days so product stays where you want it.
- Clean your spreader after each use.
- Follow manufacturers' guidelines for lubricating, cleaning, and storing your spreader.
